Design For Shear According To BS8110-1997 Spreadsheet
Shear is the term assigned to forces that act perpendicular to the longitudinal axis of structural elements.
Category: Excel Sheets Templates
Professional tools for calculations and dimensioning of mechanical engineering problems using Excel spreadsheets.
Capacities for Ordinary Bolts To BS449 Spreadsheet
Capacities for Ordinary Bolts To BS449 Spreadsheet
Capacities for Ordinary Bolts The shear strength of a bolt is a measurement of the minimum amount of force needed to break the bolt into two pieces. The shear strength of a metal bolt is approximately 0.6 times its tensile strength. A bolt commonly shears where its head meets the threads.
Design And Calculation Of Crane Bridge Spreadsheet
Universal Beams To BS4 – Dimensions and Properties Spreadsheet
Universal Beams To BS4 – Dimensions and Properties Spreadsheet
Universal Beams are used in floors will support more force vertically than a standard square beam. The are weaker against horizontal movement and do not react well to twisting.
They are used as a component in floor framing, and can be used with other beams and joists where extra load bearing capacity is required.
Check Of Working Stresses And Maximum Crack Width According to ACI 318 Spreadsheet
Check Of Working Stresses And Maximum Crack Width According to ACI 318 Spreadsheet
Crack width calculation is one of the serviceability requirements in the structural concrete elements.
The crack width of a flexural member is obtained by multiplying the maximum crack spacing by the mean strain of the flexural steel reinforcement.
