-

Geotechnical Engineering Rule of Thumb – Rajapakse – Free PDF

“Geotechnical Engineering Calculations and Rules of Thumb, Second Edition, offers geotechnical, civil and structural engineers a concise, easy-to-understand approach to selecting the right formula and solving even most difficult calculations in geotechnical engineering.

A “quick look up guide”, this book places formulas and calculations at the reader’s finger tips. In this book, theories are explained in a “nutshell” and then the calculation is presented and solved in an illustrated, step-by-step fashion.

In its first part, the book covers the fundamentals of Geotechnical Engineering: Soil investigation, condition and theoretical concepts. In the second part it addresses Shallow Foundations, including bearing capacity, elastic settlement, foundation reinforcement, grillage design, footings, geogrids, tie and grade beams, and drainage.

This session ends with a chapter on selecting foundation types. The next part covers Earth Retaining Structures and contains chapters on its basic concepts and types, gabion walls and reinforced earth walls.

The following part covers Geotechnical Engineering Strategies providing coverage of softwares, instrumentation, excavations, raft design, rock mechanics, dip angle and strike, rock stabilization equipment, soil anchors, tunnel design, seismology, geosynthetics, and slurry cutoff walls.

The final part is on Pile Foundations including content on design on sandy soils, clay soils, pin piles, negative skin friction, caissons and pile clusters. In this new and updated edition the author has incorporated new software calculation tools, current techniques for foundation design, liquefaction information, seismic studies, laboratory soil tests, geophysical techniques, new concepts for foundation design and Dam designs.

All calculations have been updated to most current material characteristics available in the market. Practicing Geotechnical, Civil and Structural Engineers may find in this book an excellent companion to their day-to day work, benefiting from the clear and direct calculations, examples, and cases.

Download Link

Drilled Shafts – Construction Procedures And Design Methods Free PDF

Download Link

Advanced Soil Mechanics – Braja.Das – Free PDF

Soils are aggregates of mineral particles, and together with air and/or water in the void spaces, they form three-phase systems. A large portion of the earth’s surface is covered by soils, and they are widely used as construction and foundation materials. Soil mechanics is the branch of engineering that deals with the engineering properties of soils and their behavior under stress.

This book is divided into eight chapters—“Soil aggregate, plasticity, and classification,” “Stresses and strains—elastic equilibrium,” “Stresses and displacement in a soil mass,” “Pore water pressure due to undrained loading,” “Permeability and seepage,” “Consolidation,” “Shear strength of soils,” and “Settlement of foundations.”

Download Link

An Introduction to Geotechnical Engineering – Holtz & Kovacs Free PDF

An Introduction to Geotechnical Engineering is intended for use in the first of two-course sequence in geotechnical engineering usually taught to third- and fourth-year ungraduate Civil Engineering students.

We assume that students have a working knowlege of ungraduate mechanics, especially statics and mechanics of materials (including fluids).

A knowledge of basic geology, although helpful, is not essential. We introduce the « language » of geotechnical engineering in the first course, that is, the classification and engineering properties of soils.

Once the student have a working knowledge of how soil behaves as an engineering material, he/she can begin to predict soil behavior, and in the second course , to carry out the design of simple foundations and earthquake systems.

Download Link

Principales And Practice Of Ground Improvement Free PDF

By Jie Han

Ground improvement is popular in many countries to solve difficult geotechnical problems, especially when construction necessarily occurs in problematic soils and under difficult geotechnical conditions.

Many recent developments in equipment, materials, and design methods have made ground improvement technologies more effective, efficient, and economic. However, the state of practice for most ground improvement technologies is that the practice is ahead of theory. Some contractors have developed their proprietary technologies, design methods, and construction techniques for their competitive advantages.

Most of the existing books on ground improvement are focused on the concept, application, and case study. However, few books have been devoted to the principles and design methods of ground improvement. This book covers both theoretical and practical aspects in the design and construction of a variety of ground improvement technologies commonly used in practice.

Download Link

Seismic Design Of Reinforced Concrete and Masonry Buildings Free PDF

CONTENT :

Causes and Effects of Earthquakes: Seismicity–Structural Response–Seismic Action.
Principles of Member Design.
Reinforced Concrete Ductile Frames.
Structural Walls.
Dual Systems.
Masonry Structures.
Reinforced Concrete Buildings with Restricted Ductility
Foundation Structures.

Download Link

345 Solved Seismic Design Problems Free PDF

This book introduces you to the seismic exam and tells you how to use 345 Solved Seismic Design Problem. It also explains how to relate this book to reference materials, such as the California Building Code, Seismic Design of Building Structure, and others.

Using this book as a study guide, you will be surprised to discover how effectively you can learn seismic principles and fundamental earthquake engineering of structure to successfully pass the special seismic exam.

This book gives you the opportunity to work problems of the same format and difficulty as those on the seismic portion of the California Special Civil Engineer exam. Every problem is fully solved.

Content:

Seismology principles, Earthquake Characteristics, and basiic structural dynamics.
Codes and regulatory provisions
Diaphragm theory
Details of structure
Design problems
A. useful conversion factors
B. reference and suggested reading

Download Link

Earthquake Engineering Mechanism, Damage Assessment And Structural Design Free PDF

This book is an expanded version of the earlier (first edition) text, Earthquake Engineering —Damage Assessment and Structural Design, here called EE-DA&SD.

Every chapter of the first edition has been altered and enlarged and new chapters have been added to include work done by the author and some of his graduate students, following the publication of EE-DA&SD.

Some remarks concerning the modus operandi of the two texts may be in order. In accordance with currently accepted methods of scientific inquiry, the procedures used in EE-DA&SD and in this bode for developing the rational earthquake engineering theory.

Content :

A Tensile Rupture Instability Similarity Earthquake Mechanism
The Canonical Accelerogram and Its Parameters
The Canonical Isoseismal Chart and Its Parameters
The Earthquake Engineering Damage Assessment and Structural Design Charts and Curves
Efficiency -Focal Depth and Figure 4.5
Superposition of Canonical Accelerograms
Superposition of Canonical Isoseismal Contour Maps
Approximate Analytical Damage (Intensity Number) Assessment Procedures
Special Topics in Earthquake Structural Engineering
Some Non-Structural Applications of the Rational Theory
Some Structural Applications of the Rational Theory

Download Link

Earthquake Engineering for Structural Design Free PDF

This chapter provides a basic understanding of earthquakes, by first discussing the causes of earthquakes,
then defining commonly used terms, explaining how earthquakes are measured, discussing the distribution
of seismicity, and, finally, explaining how seismicity can be characterized.

Earthquakes are broad-banded vibratory ground motions, resulting from a number of causes including tectonic ground motions, volcanism, landslides, rockbursts, and man-made explosions.

Of these, naturally occurring tectonic-related earthquakes are the largest and most important.

These are caused by the fracture and sliding of rock along faults within the Earth’s crust. A fault is a zone of the
earth’s crust within which the two sides have moved — faults may be hundreds of miles long, from one to over one hundred miles deep, and are sometimes not readily apparent on the ground surface.

Download Link

Geotechnical Earthquake Engineering Free PDF

By Ikuo Towhata

The main aim of this book is a collection of data which is useful in understanding the state-of-art technology and its application to new topics. Understanding the fundamental issues is important because practice makes use of many assumptions, hypotheses, and ways of thinking.

It has been my policy to show reasons why practice employs those ideas by showing experimental and field backgrounds. This idea does not change even today. Collecting background information is not very easy for an individual person.

It is necessary to read many publications; some were published in the first half of the 20th Century, and others in domestic publications. Not being impossible, this information collection is firstly a time-consuming business.

Secondly, access to old publications may not be easy to everybody. I am therefore attempting in this book to collect information as much as possible so that the new generation of readers can save time in studying.

Download Link